Technical Specifications Exhibitions

Size Guide

0m: 3.5m
4.5m: 5.5m
6.5m: Maximum

Assembly Instructions

Follow these straightforward steps to put together your exhibition stand:

Lay out and check all the components for your display.
Holding the frame by the two central poles, pull out and pull up until fully extended.
Ensure the round adjustable feet are on the bottom of the frame.
Expand the frame until the magnetic locking arms are connected together.
Then attach the magnetic bars onto the nodes on the front and back of the frame.
Simply place the top of the graphic onto the frame into the groove and it will attach.
Attach the rest of the panels ensuring each edge is aligned against the magnetic bars.
Attach your lights at the top to illuminate your display.
Your carry case doubles as a podium.
Match up the numbers on your poles and begin slotting them together.
Ensure all of the numbers match.
Click the corners into place.
Line up the graphic to the top of your frame and pull it over the corners.
Pull the graphic down the poles until you reach the bottom of the frame.
Zip up the graphic to create a tight fit.

Care Instructions

Wipe clean with a soft, dry cloth to remove dust or smudges.
Store in its protective case to prevent scratches or damage.
Avoid prolonged exposure to the elements.
Ensure all components are dry and clean before storage to prevent rust or wear.
Machine wash on a gentle cycle with cold water and mild detergent.
Do not tumble dry; air dry only to maintain fabric tension.
Avoid using bleach or harsh chemicals that can damage the print.
Store in a clean, dry space to prevent creasing or discolouration.

Additional Information

Size	2.5m 2m 1.5m: Minimum 1m: 1x3 Pop Up Display 0.5m: 1240mm X 2235mm Exhibition Pop Ups: 1x3 - frame: 835mm, width: 1240mm, depth: 306mm, height: 2235mm 2x3 - frame: 1590mm, width: 1930mm, depth: 485mm, height: 2235mm 3x3 - frame: 2275mm, width: 2540mm, depth: 685mm, height: 2235mm 4x3 - frame: 2865mm, width: 3070mm, depth: 960mm, height: 2235mm Stretch Fabric Displays: lm - 1000 X 2280mm 1.5m - 1500 X 2280mm 2m - 2280 X 2000mm 2.5m - 2500 X 2280mm 3m - 2922 X 2280mm 4m - 4000 X 2280mm 5m - 5000 X 2280mm 6m - 5960 X 2280mm
Materials Information	Coala Stay-Flat Pop Up 500mic A textured white 500 micron, super flat, printable grey back hybrid PVC/polyester mix film. Scuff resistant satin crystal finish, no need for lamination. Is capable of vibrant colours and has a grey stop light' backing. It has a matt friction back coating to help aid printing alignment. Frame: Magnetic Square Scissor Aluminium Frame Dimensions Mag Bar Mag Tape: (25mm Wide) Roll of Mag Tape: 12.70mm Mag Bar Profile size: 29mm wide X 6.50mm high Straight Aluminium Rigidiser Bar: 664mm +0mm - 1mm Stretch Fabric Displays: F/Flex Tissaro Flex One-Way Stretch Display Fabric 260gsm Flex is a super supple fabric, perfect for punchy prints on stretch frame sys-tems. It produces accurate and appealing graphics that don't distort when stretched. 100% polyester design Fire: DIN fire-rated Weight: 260gsm Denier: 150 X 70 Weave method: Warp-knitted Fixation temperature: 190-210°C, 1-2 min Yellowing temperature: >210°C Frame: Tubular aluminium frame with numbered poles that click together.
Printing Process	Exhibition Pop Ups: Drop-on-demand digital inkjet printing for high-definition image quality with smooth shadows, gradients, and sharp text. Stretch Fabric Displays: Dye-sublimation printing for durable, high-quality fabric graphics.
Sustainability	Check with your local recycling facility to find out if they accept aluminium, PVC or fabric and if there are any special handling requirements.
Environment	Most suitable for indoor use. Suited to temporary outdoor use, weather permitting, keep dry to prevent rust and preserve the quality of the print.